Users perform Netgear firmware update so that they can enhance the performance of their wireless routers. However, at times, the firmware update process can brick the router. This issue can occur because of various reasons. But, the good news is that troubleshooting it is possible. Thus, if you are wondering how to resolve the Netgear firmware update bricked my router issue, then you should take a look at the hacks mentioned in this blog. They will surely be able to help you out. Thus, wait no more, and read ahead.
[Fixed] Netgear Firmware Update Bricked My Router
1. Give Your Router a New Start
Technical glitches are the biggest and one of the most annoying reasons behind several issues related to Netgear devices out there. There is a high chance that you are experiencing the Netgear firmware update bricked my router issue because of them.
To troubleshoot it, you need to get rid of these glitches. Are you thinking about how that can be done? Well, the answer is quite simple; you need to restart your Netgear wireless router. And you can do so by turning off your router, waiting for some time, and turning it back on. Once you have successfully restarted your device, check if the Netgear firmware update bricked my router issue has left you for good.
2. Buy a New Ethernet Cable
In case you are still a victim of the Netgear firmware update bricked my router despite following the hack given above, then you need to check your Ethernet connection. Perhaps it is not stable. And that might be because of two reasons. They are as follows:
- The Ethernet cable currently in use is damaged or worn out.
- Connection between the networking devices is loose.
In order to take care of the first situation, you need to bring a new cable home. And in the case of the second one, you are required to tightly connect the Ethernet cable to the Ethernet ports located on both your devices.
In case, none of these things work for you, then it is recommended that you connect the router and the modem with the help of a wireless medium. No idea about how to do that? Well then, you should contact our experts.
3. Check the Downloaded Version
Perhaps, the firmware version that you downloaded is not compatible with the model of your Netgear wireless router. For example, if you own an N300 router but have downloaded the firmware belonging to R7000, then the Netgear firmware update bricked my router issue was bound to cross your path.
Therefore, try to update the firmware of your device again. And this time, make sure that you download the version which is compatible with the model you own.
4. Remove Viruses
Last, but not least, check if your system is infected with viruses or any other malicious software. If it is, then it is recommended that you remove them by installing an antivirus application or software on your system.
Right after you are done following these hacks, you should perform Netgear router firmware update by following the step-by-step guidelines given in the next section.
How to Update Netgear Router Firmware?
In order to update the firmware of your wireless router, you need to first open an updated internet browser on your device. Visit the routerlogin.net page. Put the login username as well as the routerlogin.net admin password to use to log in to your Netgear router.
Soon, the BASIC Home screen will appear with some options. Select Settings, the Firmware Update button option will appear after that. Now, take a walk through the steps given on screen to finish the Netgear router firmware update process.
With the hope of helping you out, we are concluding our blog based on how the Netgear firmware update bricked my router issue can be troubleshot. If you will be able to fix it via the troubleshooting hacks mentioned above, well and good. In case not, then it advised that you do not waste even a second more to contact our technical experts.
It might seem a little awkward contacting them in the middle of the night, but trust us, they are available at your service at every hour of the day. Thus, ping them now!